Reply to thread

Message: [QUOTE="Morvo, post: 991320, member: 64644"] There has been no oil loss whatsoever, I should have mentioned that earlier. I think my plug fouling was down to the float heights, which have been adjusted prior to my first post. The thing is though is that this pickup coil should work fine, or so the guy said who supplied it to me. The only thing that I can see wrong with it that i didn't notice before is that where the pickup passes the flywheel raised bit, it isn't bang in the centre, more towards the edge. Would this make a huge difference? I cannot fit the old pickup on again as I binned it as soon as I fitted this latest one :ohmy: [/QUOTE]