Stock Clutch Springs vs. Aftermarket

P

placelast

Member

Apr 11, 2001

1,298

1

• Nov 17, 2004

• #1

I'm considering swaping back to stock from aftermarket HD. Reason: clutch pull is difficult for sons, discouraging them from using it as often as they should; methinks swapping back to stock would be better for them. Any experience out there?

 

acutemp

LIFETIME SPONSOR

Sep 4, 1999

197

0

• Nov 17, 2004

• #2

PL,
I ran the stockers on my 90 KDX without any problems, my 95 needed the upgrade though. If you need some stock part's, I still have my original springs if you want them, they only have 2 rides on them. --Dan

 

P

placelast

Member

Apr 11, 2001

1,298

1

• Nov 17, 2004

• Thread starter
• #3

Thanks. Fine. Different part numbers (mine's a '90) , but worth a try. Let me know what you want for them & shipping. hit-n-miss@(removeToSend)dslextreme.com.

 

D

D36-108A

~SPONSOR~

Dec 3, 2002

367

0

• Nov 17, 2004

• #4

I put OEM KX250 springs in mine, IIRC. Not too stiff.

 

P

placelast

Member

Apr 11, 2001

1,298

1

• Nov 17, 2004

• Thread starter
• #5

Mmmm: buykawasaki.com says mine takes five; '95-up takes four...

 

acutemp

LIFETIME SPONSOR

Sep 4, 1999

197

0

• Nov 18, 2004

• #6

PL,
I don't want anything for the springs, I'll send them your way and hopefully they will work out for you.
I also run the KX 250 springs # 92144-1484, they work well but the clutch pull is quite a bit more than stock.
The KDX's do take 4 springs, the KX's take 5.
--Dan