Reply to thread

Message: [QUOTE="2strokerfun, post: 1358241, member: 69719"] On my bike, the problem with using that hole when you're filling with oil is that the clutch side cover fills with oil faster than it goes through the case to the transmission. In other words, you'll have it pour out of the hole before the oil settles. Then if you stop and just put the screw in, the oil settles and you're underfilled. I just measure and pour. I guess if you pour real slow, this wouldn't occur. But a ++ on trying to put the heli coil in. I agree you want to take the clutch cover off first so you don't mangle anything with the drill bit or any aluminum bits. [/QUOTE]