Reply to thread

Message: [QUOTE="theklink, post: 1233800, member: 69343"] I have a 99 KX250 and just replaced all the suspension bearings and want to get everything back together. Problem is that the swingarm refuses to fit back between the frame. I cant believe this. The swingarm bearing collars are simply too wide. I've tried using a mallet, but am afraid of damaging the collars. I've greased up the frame but no give. I used the bolt to cinch the swingarm end to close the gap and then tied it off with cable but still nothing. I'm about to loose my mind. If anyone has any ideas I'd REALLY appreciate hearing from you. thanks dan [/QUOTE]