Reply to thread

Message: [QUOTE="CBRob, post: 1081815, member: 70529"] Very interesting thread. I've see the the same discussions on my favorite snowmobile website, snowest. The sled disscusions took a different point of view. The consensus was... use scotch brite to remove some cylinder glaze and varnish build up. Don't use dingle balls due to the potential damage of port edges. It was also mentioned that nicasil is so hard that the cheap hones wont really touch it anyway, and if they could scratch the nicasil, how could you make sure that your honing was at the right pitch/angle. Sounds like a machine shop is required to get a proper hone on nicasil. [/QUOTE]