Timing a 85 KDX200

M

mmathis

Member

Oct 13, 2003

3

0

• Jan 13, 2004

• #1

I just rebuilt my motor , had the carb rebuilt and rebuilt the stator........so I have compression, spark and fuel but it wont start, is there someway my timing could be off? And how is this adjusted?

 

D

dirt bike dave

Sponsoring Member

May 3, 2000

5,348

3

• Jan 14, 2004

• #2

To adjust the timing, loosen the screws that hold the stator down and rotate the stator slightly.  Look closely for some marks to show you where the stock timinig is.

It is also possible that your woodruff key securing the flywheel to the crank has sheared, allowing the flywheel to shift position.  This will also screw up your timing.

 

M

mkmathis

Member

Oct 12, 2003

8

0

• Jan 14, 2004

• #3

The woodruff key is good, do you know which way to turn it (clockwise or counter to advance it?)

 

D

dirt bike dave

Sponsoring Member

May 3, 2000

5,348

3

• Jan 15, 2004

• #4

Should be clockwise to advance. 

 

M

mkmathis

Member

Oct 12, 2003

8

0

• Jan 20, 2004

• #5

Thanks, I will post when after I try