I've got a lot of spooge coming out the exhaust on my '90 RM125. It runs decent through the powerband, but it idles erratic sometimes. I've just re-packed the silencer and figure if I don't fix it I'll be packing again soon and cleaning carbon out of everything.
I'm going to start with a smaller pilot and see if that changes the idle problem. Then go from there. Any suggestions any further? I have no experience with jetting. :(
I've read some basics online, but that's all I have to go on.
You can see a picture of how much is coming out the exhaust, and the spark plug condition after 1 hr. of riding - cut and paste the link below.
image1ex.villagephotos.com/2290835.jpg
I'm going to start with a smaller pilot and see if that changes the idle problem. Then go from there. Any suggestions any further? I have no experience with jetting. :(
I've read some basics online, but that's all I have to go on.
You can see a picture of how much is coming out the exhaust, and the spark plug condition after 1 hr. of riding - cut and paste the link below.
image1ex.villagephotos.com/2290835.jpg
Last edited by a moderator: