Reply to thread

Message

[QUOTE="ericmiles, post: 1422444, member: 118906"]
Alright so I am making a list of tools I am going to have to add to my collection before doing serious repair on my bike.  I have a large collection of basic end-wrenchs, sockets, etc.  But I do not have any speciality tools, so in reading through the service manual and many posts on here, I have seen that I am going to need:
 - 1/4 in Torque wrench measuring in inch/pounds
 - 3/8 in Torque Wrench (foot/lbs)
 - crow foot adapter or the torque wrench adapter from motionpro 
 - flywheel puller
 - Brake bleeder
 - Some rope clamp thing to hold the flywheel? Not sure where to find something like what I saw in the service manual?
 - Impact Wrench probably have to go electric and maybe get a hammer type one as well
 - Fork maintenance related tools...I see lots of home made suggestions with PVC etc...never done forks before, so I have some studying to do

In terms of projects I am going to try to tackle in the near future I am planning top end, suspension (front/rear), wheel bearings, brakes and clutch

What tools am I missing from my list?
[/QUOTE]

Verification

Which ocean is California closest to?