Reply to thread

Message: [QUOTE="lwsmithjr, post: 611473, member: 35074"] The front # plate from a '99 will not fit the '00-'03 mount on the upper triple clamp without some type of modification. If you decide to use the # plate from a later model year, you'll have to change the front fender as well. The only reason I know this is because I tried using a front fender off of my son's '01 125 (I like the style better) on my '99. It would not fit under the front # plate properly so I went to swap that out as well. The '96-'99 front # plate bolts on through the front -- the '00-'03 bolt through a molded on tab on the back of the number plate down from the top. It would probably be feasible to fabricate a small "L" bracket to bolt on the clamp and the fasten the front plate to that "L" bracket. [/QUOTE]