Reply to thread

Message: [QUOTE="Smit-Dog, post: 715951, member: 25436"] Again, check with what the standard thickness is that most trailer manufacturers use. I believe that since the ATP is up against a hard surface, even 1/16" won't have a denting problem. It'll weight half as much, and probably be cheaper too. I've never had a problem with swaying or movement with the bikes at a diagonal, although running the bikes parallel with the trailer is probably the ultimate in stability. What I do is take a tie down and run it under the bike from the bike shoe to some point on the bike like a foot peg, frame spar, or rear frame, and snug it up. Extra piece of mind. The rear of the bikes move very little, and I've taken the trailer down some pretty bumpy dirt roads. [/QUOTE]