Reply to thread

Message: [QUOTE="BSWIFT, post: 715962, member: 16802"] Sorry, I forgot. Check with Mr. Goodwrench on the brake wiring. Your truck may already be wired but not have the connector. For the power needs, add your wattages, then buy a generator that will handle 10 - 20% more than you expect to run. Use a deep cycle marine battery and run your 12 volt wire in nothing less the 16AWG. 110VAC wiring should be 12AWG with a ground. Where practical, seperate the two wiring systems with wire loom. Also, spend the extra money for ground fault ciruit interupters(GFCI) recepticals. Put the battery in a Marine type container on the front of the trailer. As for painting, sand with 600 grit wet/dry, prime any bare metal with a top quality primer. Shoot with your favorite color in several thin coats to prevent runs. Might be cheaper to have a body shop do the paint. [/QUOTE]