Reply to thread

Message: [QUOTE="juice_bruce, post: 1276605, member: 82243"] Thanks, The Piston and Rod are toast. Rod bearing exploded and there's parts everywhere. I can get a new Crank, Rod, Bearings and gaskets kit for $135 so I'll likely get that, depending on the damage. I found a buddy that has a Grabbit Tool, so that should work nice. Putting the motor back in the frame is an excellent idea, I'll do that. Another thing I'm currious about is...where the bolt go's on the crank...the centre of the threaded crank has a groove, as if a flat screwdriver would go in there but the gap is too wide...see pic...any idea what that is for? Thanks [/QUOTE]