Reply to thread

Message: [QUOTE="juice_bruce, post: 1276882, member: 82243"] I got her off! Yes it does drive the water pump...good point. The Grabbit Tool is basically vise grips similar to what I used. So went and picked up a pair of vise grips, see pic. Took the pic after I got the nut off, I actually wrapped the gear with a rag and the put the vise grips on, the reverse nut came off easily with the air-type impact gun. Didn't put the motor back in the bike, but next time I'll know. Thanks for the assistance, Bruce [/QUOTE]