Reply to thread

Message: [QUOTE="CROGGR, post: 1056040, member: 62108"] First make sure all your carb vent tubes aren't clogged. Next pull out your pilot jet and clean it out with some carb cleaner and a sewing needle. Also, on the back of the carb (where the air boot attaches) there is a main air jet and a pilot air jet, make sure they are clean as well. That would be where I would start based on your description. The next place would be the carb slide, There is a vaccum plate with a little black gasket that sometimes goes bad and leaks that can cause the syptoms that you have described. And also the vaccum plate itself can develop a crack and have the same problem! Good Luck! [/QUOTE]