Tunning Tips For Rm250 '98 Needed

[CAPTAINF]

Dear All!! Hi.

I have a RM250 98, and I am looking for tunning tips for this bike. Any andvice?

P L E A S E

 

[mgo2000]

Check out Eric Gorr's MX & Off-road Performance Handbook. It's got good information on Tuning 2-Strokes.

 

[CAPTAINF]

magoo2000, thank you for the advice!!

I will check it!!

Andreas

 

[Bullwinkle58]

The most basic things are often over looked, and they dramatically affect how your bike performs.

-Engine condition
-Jetting
-Suspension setup & condition
-Lubrication and condition of all moving parts (linkage, swingarm, cables, etc.)
-Condition of brakes & fluid

Make sure those 5 things are working how they should, and you will be just as competitive on your '98 as you would be on a new '05.

 

[flyinzuki]

Assuming you have the powervalve cleaned and working properly.
Try different settings with the powervalve preload spring.
A mag once printed to take a little preload off...
but that made my '00 fall flat on it's face.
I wound up with about 1/8 of a turn extra preload and it made a big difference.