Reply to thread

Message: [QUOTE="whenfoxforks-ruled, post: 1383549, member: 73147"] You have a basket, an inner and outer hub/pressure, friction plates, metal plates and springs. The basket gets grooves in it where the friction plates ride against its outer edge. They can be filed, if done evenly, maybe 2 times. The gap gets to wide for the friction plate tab to fit in. The inner hub gets worn on the face, there is a minimum thickness and it gets notches from the metal plates. The outer hub gets worn the most, on its face, and is prone to warp. Replace what is necessary, and get a complete clutch kit from Service Honda. It will come with both sets of plates and new springs. Change your oil often, and do not abuse the clutch. Putting new plates in bad hubs or a bad basket, will waste the new plates in no time. Aftermarket parts, Hinson is good, I think the Wiseco is better. Honda makes the best clutch plates. Maybe some stiffer springs? Vintage Bob [/QUOTE]