Reply to thread

Message: [QUOTE="Ol'89r, post: 812672, member: 17212"] Bodge. The oem part number probably won't do you any good. There should be a number on the side of the bearing itself. You can usually go by this number or better yet, measure the bearing. You will need the outside diameter, inside diameter and width of the bearing. Take the old bearing with you to the bearing supplier to insure you get the same quality of bearing. Seals are measured the same way but, the specs are usually on the side of the seal. Re: 42X12X10 means the seal is 42mm outside dia. 12mm inside dia. 10mm wide. Just my $ .02 :cool: Ol'89r [/QUOTE]