Reply to thread

Message: [QUOTE="WhiskythrottleKeit, post: 1052830, member: 63334"] Could be where the bearings press into the crank case.. how hard was it to press the bearing in? Did you have to heat the case and freeze the bearing? you should have. One more thing are you sure your fly wheel is tight? And not just the bolt striped feeling tight. If your cases are worn where the bearing rest you can freeze the bearing heat the case and use a small amount of JB weld around the outer part of the bearing and it will keep it from spinning in the cases and making it worse. there's another ways to fix it to like shimming the bearing or whacking the cases...Don't ask what whacking is lol nasty or not [/QUOTE]