Reply to thread

Message: [QUOTE="Z0RR0, post: 1152783, member: 33330"] Frozen cooling system = very unlikely. I run 40% anti-freeze, the bike sits in the basement (garage is too cold :laugh: ) and I warmed it up right as I pulled it out. As for the jetting the plug is cocoa coloured ... and I can't figure out how/why a lean jetting would damage the crank bearings. Too lean of a jetting would overheat, and melt the piston ... but as long as I have not forgotten premix oil, it's not gonna damage anything with the crank bearings (unless the piston broke to pieces, which did not happen). [/QUOTE]