What do I need?

[DirtBiker125CR1313]

Ok so I figured out I need a new right side crank seal for my 07 Cr125. I need to know what parts/tools I need to buy so I can do the whole job. Also I would appreciate any tips for putting in the new seal. Thanks.

 

[_JOE_]

All you'll need is a good clean, well lit work area, a service manual, a basic tool set and possibly some other tools depending on the bike. An impact wrench and impact driver are a couple tools that can make things seem very simple where you may have gotten hung up without them. Don't even consider doing it without the manual. The seals are cheap, the stuff you mess up trying to do it halfassed is what gets expensive. ;)