Reply to thread

Message: [QUOTE="Coop37, post: 1014772, member: 20069"] About 110.00 for the rod kit, and then while you are split apart, then replace the suport bearings and seals, gasket set, and bearings, I would say another 100.00, then if they pull the motor out of your bike,and do all the work, you are looking at about 6.0hrs in labor, plus the crank rebuild, 75.00 to 80.00 so if there shop rate is say 65.00 to 80.00 per hr. That will probably be a close est. [/QUOTE]