Hello! Im doing top end rebuild on my kx250f, and when i removed the cylinder a small amound of dust drizzled down into the bottom end on the cranck from the cylinder gasket.
You thing some of it will come out with oil if i flush it through like 2 times before i start it? Or are the seals and bearings doomed down there and my new cylinder..
(Not a lot of dust, but still...)
You thing some of it will come out with oil if i flush it through like 2 times before i start it? Or are the seals and bearings doomed down there and my new cylinder..
(Not a lot of dust, but still...)