Reply to thread

Message: [QUOTE="XRpredator, post: 1390846, member: 19389"] From what I know of the "works" style bare metal pipes is that they are just that: bare metal. You don't clear coat 'em, paint 'em, or whatever. You wash 'em off, then take the scotch brite pad and some elbow grease and clean off the rust that will develop. Once you get it nice and clean, give it a shot of WD40 to keep the rust away (until the next time you ride). If you want a pipe that stays looking nice, get a plated one. Or paint it with the high-temp black. [/QUOTE]