Reply to thread

Message: [QUOTE="glad2ride, post: 1079525, member: 62076"] Is the fork cap and rod nut in final position?? To me, it looks like the cap is not touching the nut. Hanging the fork in free air sounds valid to me. If you want to get real technical, though, the forks mounted in the clamps, with the qeight of the front wheel pulling down on the top out springs would be most accurate. I would suggest a washer on each end of thespacer, like OEM, so if your springs are so long that it is not possible, then start looking for washers. [/QUOTE]