Reply to thread

Message: [QUOTE="helio lucas, post: 1394828, member: 78346"] well, i guess you hit the nail. so much carbon build up usually is the right crank seal. they are cheap so just replace both of them. the left one is behind the stator and you can just pull it out with a small screw driver. the right one is more difficult since you have to drain the oil, pull the clutch cover and the clutch assembly to get access. also make sure you have no leak on the carb boot and on the head gasket. :cool: if you don´t have a service manual, get one. they are invaluable and should help you in the task. [/QUOTE]