Reply to thread

Message: [QUOTE="helio lucas, post: 1394844, member: 78346"] i am not sure what do you mean with carb slide height. you have two screws on the carb. the one in the middle controls the idle air flow, the other controls the fuel mixture. to adjust to more air flow you just turn the screw in, it will be yeld by hold the carb slide from being totally closed. if you mean the needle on the carb slide, then the middle position is a good start. here is a link to carb fine tuning (jetting) process to help you to understand the basic procedure :cool: [url]http://justkdx.dirtrider.net/carbtuning.html[/url] [/QUOTE]