Reply to thread

Message

[QUOTE="SpDyKen, post: 1406564, member: 60208"]
mrbb,

What is the current compression reading?  What jetting is in the carb. now?  What slide?  What fuel are you running & what has been done to the Cylinder head?  What is your timing set at? Which FMF pipe?  Which silencer?  What suspension settings & sag are you running, currently?  What handling issues would you like to improve?  Have you greased & adjusted the steering head bearings yet?  What condition are the various rear suspension linkage needle bearings in?  What about the wheel bearings?

I have not yet read any specific information from you about any of these details.  Gather this information, then do a search of each specific topic.  It's almost certainly been discussed, with respect to the YZ250, here already.  You'll find [I][I]lots[/I][/I] of good information that way.

Then, when you have some more specific questions, along with all of your technical specs, post in [I][B]those[/B][/I] threads you've found.

You'll get the information you are looking for that way.

Good luck, Ken  :ride:
[/QUOTE]

Verification

Which ocean is California closest to?