Reply to thread

Message: [QUOTE="Jamz, post: 1001237, member: 65668"] I am replacing the oil seal on my 00 YZ250 front fork. I have torn the fork down and ready to put it back together. The problem is there is a metal sleeve that is driven in the outer tube that I guess HAS to come out. The book doesn't say it does but does say it has to be driven back in during the re-reassembly. The Inner fork has a collar on it that is to wide to go through that sleeve so just sliding the forks back together is not an option although they slid apart just fine :| Anyone have to do this and if so what tools do you need to get that sleeve out. Or is there a trick to getting the 2 halfs back together w/out pulling that sleeve? Help please....else going to have to go to the shop and ask them to put the 2 parts back together....and get the 3rd degree on NOT reading the part in the book that says this SHOULD be done by an authorized repair tech :bang: [/QUOTE]