YZ250 wheel bearings

S

smatta4u

Member

Feb 11, 2002

27

0

• Mar 31, 2010

• #1

I am trying to replace the rear wheel bearings on my '02 YZ250. How do I get them out? Do I need a puller to remove both sides? There is not much room in between because of the spacer for a puller to grab the bearing. I think both bearings are up against a shoulder so I can't push thru from the opposite side. Any help is greatly appreciated. Thanks.

 

C

COLEMANAPP

~SPONSOR~

Feb 19, 2002

304

0

• Mar 31, 2010

• #2

You need to remove the brake side c-clip, then punch out that bearing from the opposite side, Then remove the sprocket side bearing by punching it out from the brake side.

 

S

smatta4u

Member

Feb 11, 2002

27

0

• Mar 31, 2010

• Thread starter
• #3

The spacer does not move out of the way very far making it tough to get in there. It might be a slow process.

 

S

smatta4u

Member

Feb 11, 2002

27

0

• Apr 1, 2010

• Thread starter
• #4

Success. After a couple of taps the spacer had enough room to move out of the way and the rest was easy. Thanks.