'01 YZ 125 clutch cover will not come off

[robrm250]

I'm tring to take off the clutch cover on a '01 YZ 125. I have the 6 bolts out, but it seems like a spring is holding it on. The manual does not show any thing except the bolts holding it.

 

[chevy383cid]

Did you take the cable off?? It should come off.It has two dowl pins that located it but there should be no problem.

 

[nikki]

If I remember right to my '01 YZ 125 clutch days, aside from the regular bolts, you need to remove the clutch actuator arm. There is a little bolt with a washer that goes in to the clutch cover up by it. Remove that, then pull the actuator arm up/out. Hopefully that makes sense.

 

[nikki]

Another tip, if it's on there good, is tapping on it with a rubber mallet or a wrench or something to break it loose.

 

[robrm250]

Thanks nikki, you got it with your first reply. I had it broke loose, but I could tell some thing else was holding it.