DrTwoHitCure
Member
- May 30, 2023
- 2
- 0
Hello. So Im new here and I have a problem I just can't figure out please help if can..
So I recently made the switch from kawa whole life to A 2013 crf250r. Has new dome top piston, hotcam stage 2, yoshi exhaust, double wound springs, kibble stainless valves new ecu.......... Go on but here's my deal.
Did the whole break in and the week later went couple hours trail ride. Run perfect then all sudden dies. Now u start it and idels fine and give lill throttle it's fine till hit 2500ish rpm and mil light does one long blink then starts popping n back fire.. what's going on?
So I recently made the switch from kawa whole life to A 2013 crf250r. Has new dome top piston, hotcam stage 2, yoshi exhaust, double wound springs, kibble stainless valves new ecu.......... Go on but here's my deal.
Did the whole break in and the week later went couple hours trail ride. Run perfect then all sudden dies. Now u start it and idels fine and give lill throttle it's fine till hit 2500ish rpm and mil light does one long blink then starts popping n back fire.. what's going on?