Those of you that have been following my fustration will be happy to know that the bike is now ripping. 89' 200
I hope the below saves someone a awesome headacke.
Fault 1 - Running to rich(thats what I thought) at WOT and had big spluters and smoke.
Faulty barrel (the surface that meets the head) Water was getting through and into the KIPS. As soon as the KIPS opened, water poured into the cylinder.
Reground and new gasket.......all problems gone.
Fault 2 - Hunting and running lean at idle.
The neddle was the wrong one.
Fit right needle and.............all problems gone.
I was stealing parts off my 88' 200 to slove the problem and now am going to fit a new slide ( VALVE-THROTTLE,CA6 ) and needle.
Does anyone have a better idea or hop up for these parts, besides the factory stock standard?
16025-1148
16009 - 1385
Thanks to all
Mark - SA
I hope the below saves someone a awesome headacke.
Fault 1 - Running to rich(thats what I thought) at WOT and had big spluters and smoke.
Faulty barrel (the surface that meets the head) Water was getting through and into the KIPS. As soon as the KIPS opened, water poured into the cylinder.
Reground and new gasket.......all problems gone.
Fault 2 - Hunting and running lean at idle.
The neddle was the wrong one.
Fit right needle and.............all problems gone.
I was stealing parts off my 88' 200 to slove the problem and now am going to fit a new slide ( VALVE-THROTTLE,CA6 ) and needle.
Does anyone have a better idea or hop up for these parts, besides the factory stock standard?
16025-1148
16009 - 1385
Thanks to all
Mark - SA