I have just purchased a 94 kx500, i want to put a 15 or 16 tooth front sprocket to bring down the troque.
The stock sprocket it a 14T, would a 16T fit?
I know i will need to extend the chain.
thanks
A 1 tooth change on the front is equal to about a 3.5 on the rear........big difference. Countershaft sprockets are fairly cheap, I'd go just 1 tooth on the front and see what you think.......chain will probably work.
Whats your rear sprocket , stock is like 47ish. so stock is sprocket ratio is 3.35
your new ratio would be with the 15 at 3.133 for a ~ 6.5% toward top speed
and with the 16 it would be 2.94 for ~ 12.25% increase to top speed
so you would gain top end like mad with the 16 , but at the same time you would be losing that same percentage on the bottom end, thats alot , If I were you I would go to the 15 and try it, you would be making a drastic change going to the 16.
Just wanted to show off the math involved
Lok
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.