CR 125 water pump

[Deputy25]

I need to change the oil seals in my son's '01 CR 125. I need to remove the impeller from the water pump, and the manual simply says to spin it off. It doesn't specify right/left-hand threads. It also doesn't explain how to stop the impeller from spinning in order to remove it. Any guidance would be greatly appreciated. :bang:

 

[wornknobby]

it has right hand threads, just use a 3/8 impact gun and put it on a slow seeting, you don't need a whole lot of power to get it off. it will spin but the impact will have enough speed to spin it off.

 

[Deputy25]

Thanks :clue: