I went to start the bike today cause it was nice out.
1) pulled up the choke - took three kicks but started.
2) Let warm up alittle moving the choke lever up and down to keep the rpm's from reving like crazy.
3) Got on it pushed the choke off, made it 100' then had to pull it up again, I made it to the end of the street and it died and would not start back.
4) took the plug out and it was SOAKED WITH GAS!
5) Cleaned the plug and re-installed it and NO CHOKE it still wouldn't start- Tried too! but never ran.
6) Took plug back out and it was SOAKED again and I didn't use the choke either.
What do I need to do?
1) pulled up the choke - took three kicks but started.
2) Let warm up alittle moving the choke lever up and down to keep the rpm's from reving like crazy.
3) Got on it pushed the choke off, made it 100' then had to pull it up again, I made it to the end of the street and it died and would not start back.
4) took the plug out and it was SOAKED WITH GAS!
5) Cleaned the plug and re-installed it and NO CHOKE it still wouldn't start- Tried too! but never ran.
6) Took plug back out and it was SOAKED again and I didn't use the choke either.
What do I need to do?