- Nov 19, 2002
- 645
- 0
- Thread starter
- #26
ok thanks a lot.. what about the clip position in the needle? Stock? and Air screw?
KDXFreestyle said:I now understand it, excepot for the signs of which way to go.
First read this http://justkdx.dirtrider.net/ go to carb tunning tech section and under stand it! time to study.KDXFreestyle said:thanks for the advice, asnd u are right.. SUPER easy... My friend showed me how to do it, but the only thing is, what signs do you look for to know which way to go? My hjetting is stock, except for a 155 Main. Th ebike runs AWESOME, and idles fine, but it has a bog, and wont pull a gear if your near 1 too high or so. other than that the bike is SO AWESOME! What do you think about this issure with the bog? What sign is it? Would a 45 pilot help?
Thanks for all the info, it helped a lot. I now understand it, excepot for the signs of which way to go.
The mods I have on now are the PC pipe, and the boyesen pro series reeds.
Thanks again! :thumb:
KDXFreestyle said:ok thanks. right now I am going to go look at my pl.ug and see what it looks like.
KDXFreestyle said:My bike bogs a LOT when its in say 1, or mabey half a gear to high, it wont pull.
~cut~
Stock was a 160 I believe, and I put in a 155. Th ebike SCREAMS on top though, and hits pretty damn good, just that bog.
KDXFreestyle said:If I have a 48 in there now... and i put in a 45, that will make it leaner, correct? (less gas)
The air screw helps with the pilot circuit, am I correct? And in (turning it right, I believe) will make it more rich? Please correct me if Im wrong.
KDXFreestyle said:Just so you guys know, I installed Boyesen pro series reeds at the same time as the pipe, but im not sure if that has any effect on jetting.
KDXFreestyle said:My plan is to look at my plug, and see what happens, my bike is smoking a lot, but i have really rich gas. Im not positiv on the mixture, but it should be somewhere around 32-40:1... mabey even richer (richer to me means more premix in the gas, right?.. thats what I mean when I say it)
KDXFreestyle said:Then try out the 45 pilot and see what happens Then try the 42 if it doesnt, or helps a little. Then mess with the air screw and needle position last. does this sound like a good plan of attack?
KDXFreestyle said:if someone could walk me through the process of how to change the clip position I should be all set!
9. realise that dealer isn't crazy...you are