EncyclopediaRonnie
Member
- Nov 8, 2010
- 142
- 0
hey guys what is the best place to start im jetting a kx125 has stock pipes carbon reads. just rebuilt motor with steel sleeve and uped compression ration to aprox 10.1. actually is a tinny bit under.
in it now is
pilot:50
main:152
clip in 2nd or 3rd from top
stock is
pilot:50
Main:168
clip: not specified
or fmfs jetting guide states
pilot: 52
main: 158
needle clip: 3rd
air screw 1.5.
this is my 3 options im thinking ill start at the fmf guide and go from there.
also what plug to use b8es?? it had a 6 in previously
any tips more than welcome never tried jetting a bike before so this gonna be fun lol
cheers hagen.
in it now is
pilot:50
main:152
clip in 2nd or 3rd from top
stock is
pilot:50
Main:168
clip: not specified
or fmfs jetting guide states
pilot: 52
main: 158
needle clip: 3rd
air screw 1.5.
this is my 3 options im thinking ill start at the fmf guide and go from there.
also what plug to use b8es?? it had a 6 in previously
any tips more than welcome never tried jetting a bike before so this gonna be fun lol
cheers hagen.