psustang89
Member
- Jun 22, 2006
- 63
- 0
Another question about my newly acquired 94 RM250. At full or almost full throttle it loads up and runs/sounds like crap. It sounds like a bike that's not warmed up yet. I did a top end rebuild as soon as I bought it and it's been running like this ever since. I attempted to move the E clip on the needle in the carb up a notch, but it was already at the top. I run 32:1 and I ride woods. I use BR8ES's and it fouls them every hour if I'm lugging around the trails. Air filter is clean. Reeds are good. Is this a carb issue? Jetting? Could it have something to do with the power valve when I did my rebuild? Air Delivery? I'm desperate, please help! :ohmy: