Need to get the engine out of the frame and the blasted swingarm spindle wont budge. THe bike is a Husky WR250 but imagine all bikes are the same - the spindle as been liberally soaked in WD40 to loosen it and the weight of the bike is on a stand , the back wheel has been reomoved but still it wont budge.
Would appreciate any advice on how to remove this sucker as hitting it with a lump hammer and a drift dont seem to work .
Thanks
Cello
Would appreciate any advice on how to remove this sucker as hitting it with a lump hammer and a drift dont seem to work .
Thanks
Cello