kawasaki 2 stroke

  1. N

    04 kx85 Kickstart/compression is to stiff/high to kick over

    Hey guys I'm a new rider and in my noobness was pushing the 2-stroke kx85 hard on a main road in third gear then went up a hill in third and the bike sputtered out and died. After it died the kick start was stiff and very hard to push down, it goes down but I'm unable to kick it over. When I...
  2. B

    1997 kx125 powervalves linkage

    I got a kx125 and it bogs right before the power band I took off the pipe and the power valves cover is missing and there isn’t a connection between the actuator rode and the power valve. Rod in wonder what I’m missing on my bike
  3. zackbrappp44

    2001 kx125 bogging on bottom end and surging on top

    I have a 2001 kx125 this is running what pro Circuit recommend for jetting (I have a platinum pipe), but the bike seems to run rich in the low rpms and then up top it seems to have sudden surges once in a wile when I do a pull. I don’t want to ride the bike if it is going to damage the motor...
  4. zackbrappp44

    2001 Kx125 jetting problem

    Hey guys, I just rebuilt the top and bottom end of my KX125 and need to re jet the bike. I repacked the exhaust, cleaned the pipe and my jetting specs are 45 pilot, 350 main, stock needle on 2nd pos, air screw 1.5 turns. The bike seems to bog down low and when I get it into the power band it...
Top Bottom