1 1/8" bar mounts need help 02 cr 125

C

cdncr125

Member

Jan 20, 2005

22

0

• Apr 18, 2006

• #1

i need some bar mounts that will fit stock 2002 cr 125 top triple and will fit 1 1/8 bars will these work? if not please show some that will because i already placed an order but i have to send the money and if these wont fit i need to get the order changed first thx in advance

http://www.denniskirk.com/jsp/produ...in&catId=&productId=p594557&leafCatId=&mmyId=

 

J

jib

Member

Jan 23, 2000

67

0

• Apr 18, 2006

• #2

I believe those mounts were made specificly for the tag upper tripple clamp. I may be wrong, but i'd check with Tag before sending your money.

 

C

cdncr125

Member

Jan 20, 2005

22

0

• Apr 19, 2006

• Thread starter
• #3

ya. i took those out of the order and im gunna splurge and get a whole new applied clamp set. i have one question though i have a new stock bearing kit coming that i was gunna use on my stock clmaps will these bearings work with the applied clamp kit? the bearing kit is piviot works. thx in advance.

 

C

Chili

Lifetime Sponsor - Photog Moderator

Apr 9, 2002

8,062

17

• Apr 19, 2006

• #4

I assume your talking about the steering stem bearings? If so yes they will be fine with the applied clamp.