Reply to thread

Message: [QUOTE="T_Bois, post: 1370464, member: 110582"] Maintenance on a 4 stroke should not cost more then a 2 stroke. You have valves to adjust, but I don't mind doing it on a 1 cylinder bike. Now if you are talking about rebuilding the top end, figure spending almost twice the money on the 4 stroke. Also, you will need a bit more motor knowledge because you valves, cam, and a cam chain. You may also need a few more tools. The difference in cost is offset by the fact that the 4 stroke motor should out last the 2 stroke. [/QUOTE]