1992-1996 cr250 jetting

[d_alexand]

I've looked up the jetting for the stock 1992-1996 cr250's, and searched this forum but haven't found much info. My bike runs pretty good but I wanted to compare the current settings to see if it's close to what others are running... the main was leaned out but the needle was set richer so I'm thinking it could be better. The bike has a FMF Gnarly pipe, filter, and reeds. Please share your jetting info if you have it.

stock '95:
175 main
55 pilot
r1368m needle
3rd clip

stock '96:
175 main
52 pilot
r1369ls needle
3rd clip

My current settings:
172 main
55 pilot
r1368m needle
4th clip

 

[helio lucas]

http://www.fmfracing.com/techsupport/jettingcenter.aspx
http://www.procircuit.com/jettingspecs.htm
and also:
http://www.dirtrider.net/forums3/showthread.php?t=60392&page=1&pp=20

 

[d_alexand]

cool

Thanks for the P.C. and FMF links, that's exactly what I was looking for. Looks like I just need to get the needle sorted and change the air screw to 1 1/2turns.