S snb73 Member Nov 30, 2003 770 0 Feb 25, 2006 #1 I am replacing the clutch on my 2003 RM-250. I am looking at a Barnett and EBC clutch kits. Both kits have kevlar friction plates, steel drive plates and heavy duty springs. Any opinions or suggestions? Thanks, Steve.
I am replacing the clutch on my 2003 RM-250. I am looking at a Barnett and EBC clutch kits. Both kits have kevlar friction plates, steel drive plates and heavy duty springs. Any opinions or suggestions? Thanks, Steve.
C Chili Lifetime Sponsor - Photog Moderator Apr 9, 2002 8,062 15 Feb 25, 2006 #2 OEM, I've used both EBC and Barnett and will stick to OEM from here on out.
CR3999 Member Feb 28, 2000 163 2 Feb 25, 2006 #4 third that OEM. For one thing the tangs on the after market are real narrow and cuts into the basket faster.
third that OEM. For one thing the tangs on the after market are real narrow and cuts into the basket faster.