Reply to thread

Message: [QUOTE="DieselTech, post: 1184835, member: 74999"] mojonito - I decided to measure the lean angle today - it's actually just around 30 degrees when it begins to leak - running or not, makes no difference. At that angle it will leak a small amount, 5-6 drops, then stop, then leak again after a few seconds, etc., etc. It seems to me that it must be filling the bowl up past the vent, then it leaks out, then it fills up again, etc. I think most likely a leaking needle/seat, so I guess I should pull the bowl and take a look at it, maybe check the floats & adjustment while I'm in there. If I lean it over more, it will leak continuously. Am I on the right track here? I wish I had this carb apart before, so I knew where the overflow tube was inside the carb (which side - I suspect left side) and how the float arrangement was........ [/QUOTE]