Originally posted by KDC:
I've had my 520 MXC for a couple of weeks and have done a few mods to it, like a BigGun exhaust, skid plate and etc. I'm curious about the 18 mm offset triple clamps? How will they help the performance of my bike? Wont that cause some headshake? And which make would you recommend?
Originally posted by Scott in KC:
Mark, you just hit on something with that skidplate noise thing. My Husaberg seems a little noisier than normal, nothing extreme just a little rattle (please, no Husaberg jokes)The previous owner said it's always done it, I have no reason to doubt that. But that would make sense, you have a metal megaphone thowing that gearbox noise right up at you. Maybe some foam would help.
Originally posted by Bill_RC1:
I was informed by several riders and mag articles that the 18 and 16.0 mm ofset triple clamps greatly improve the turning of the KTM - can't run the 16.0 mm offset on the 2-stroke due to pipe clearance. I'm putting on a set from Applied Racing - won't have my bike out until next weekend put I'll let you know what I think about them.
I won't with the 18.0 mm for the head shake issue. Will feed back and let you know if I get any.
Did you have to do any re-jetting with the exhaust system? I know on 2-strokes you always do but what about the 4-stroke.
Originally posted by Bill_RC1:
Very loud noise that stops and starts when you pull the clutch in.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?