91 KIPS help

Hi, I have a new to me 91 200 and I'm doing a top end. I have the barrel off and all the kips covers off. I found the top of the second valve gear shaft (from the actuator side) to be broken off about a half inch from the top. It still locates in the spacer, but just barely. The valve seems to function, although it hangs up once in a while. I ordered a new shaft.

My question is how do I fully dissassemble the KIPS valve to clean it? I ordered a manual, but there was a shipping problem and I had to start this job without it. The articles on here cover the newer guillotine style valve, not the older rotary one.

I can pull up on the third kips gear shaft, but the second one is broken, so I can't pull it up. The first one won't come up at all.

Thanks for any advice.

OK, I found some threads about this, I suppose I should order the left side valve as well. but I still need to know how to get the valves out.

I just need to know how the rack comes out. I've tried pulling it out and pushing it out the far side. No love.

Thanks, I unsderstand. The thing I didn't try was rotating the shaft when it stops against the valve.