99 KDX 220 Sensor Mounting??

[enduro400]

Trying to find out how everyone mounts there enduro computer sensor to the bike. And were are ya'll putting the magnet?

 

[andrew]

OK, well, I mounted my magnet to the brake disc...the sensor goes on the inside of the caliper bracket (forward of the caliper itself) with a bit of vacuum hose as a spacer to get it close to the disc. Had to drill a tiny hole in the disc itself, as well as one through the caliper mount(on the fork leg).
good luck, hope it gives you some idea's.
Andrew

 

[Mrobbins]

You may have a different computer/magnet but the pictures on the Trail Tech web site should give the basic idea. http://www.trailtech.net/kawasaki.htm

 

[Mrobbins]

One more thing ...... If your magnet is not a replacement bolt for the rotor (why elese would you ask), it just gets epoxyed into a slot on the rotor. Trail Tech sells the rotor bolt replacement magnets. I have no affiliation with them, it just worked well on my bike.
http://www.trailtech.net/accessories.htm

 

[D36-108A]

Fredette sensor on the fork, ICO magnet on the hub.

The Fredette sensor is very rugged and enduro-worthy.

 

[enduro400]

Thanks everyone for the sugestions. We'll try something before the season starts. (ha, ha one week)