Reply to thread

Message: [QUOTE="bclapham, post: 425959, member: 25565"] you can some similar discussion here: [url]http://www.dirtrider.net/forums3/showthread.php?threadid=55533[/url] i went through similar issues with oil levels, i think i good way of starting is go with a low oil level (high number of mm from the top of the fork) and if you bottom add 10 cc of oil at a time, until you only bottom slightly on the biggest junp of the track. (10 cc equates to about 10 mm given the internals etc. from my calculations). as far as the bleed screws, i would loosen the triple clamps and rotate the fork since this will take the stresses of the fork (it has to be done once in a while anyway). this could also be an oportunity to raise or lower the fork which may help the steering or handling issues you have. disclaimer: i am by no means an expert on these issues, but i am trying to learn and understand, so if i need to be corrected then please do! [/QUOTE]