Reply to thread

Message: [QUOTE="cujet, post: 1215507, member: 19501"] [b]XR600 mods[/b] Years ago, I did the mods you talk about to my XR600. Bit by bit. After all that, I found that the best bet was to do it all at once. I like the big bore kits, but a significant change is necessary to get a seat of the pants improvement. Don't expect 30cc to give tons of arm ripping power. 30cc is only 5%. My suggestion is to add a good sized big bore kit, better cam, better pipe (don't forget the other mods necessary, such as airbox) and then jet it. This way, you only tune it once. The final result is a big jump from what you currently have. Chris [/QUOTE]